To complete the installation of your SAM4 system, you will need the following tools, which are not supplied by Samotics. Ensure that these items are available before beginning the installation.
Required Tools:
Certified multimeter
Size 10 ring or fork spanner
Size PH1 crosshead screwdriver
Voltage detector (e.g., multimeter or screwdriver with voltage detection)
Small (1mm) flathead screwdriver
Wire strippers
Faston crimp tool
Ferrules with a crimping tool
Marking clips or labels to identify the phase wires
Standard installation materials (e.g., tie-wraps and 1.5 mm² installation wire in various colors)
Laptop for configuring the system using the SAM4 Setup Tool
Optional Tools:
Ethernet cable on a roll
RJ45 connectors (ELA/TIA 568B)
RJ45 crimping tool
RJ45 pair tester
DIN rail
Extra enclosure