Please carefully read all hardware instructions before starting installation, and follow all warnings and guidelines listed on the equipment labels and in the installation manuals.
Warning All equipment operates with low voltage, up to 690V AC, which can cause serious electrical shocks, fires, or even death. Always exercise extreme caution.
Notice Only qualified engineers familiar with safety, electrical engineering, and EMC guidelines should install the equipment.
Warning Switch off all power supply equipment before beginning installation in the control cabinet.
Warning After powering off the control cabinet, wait at least 10 minutes before starting any work. Variable Frequency Drives (VFD) need time for their internal condensers to discharge. Check the VFD manual for the exact discharge period.
Warning Use an approved and certified multimeter to confirm that the control cabinet is voltage-free before proceeding.
Notice Do not connect the device to a voltage higher than specified on the power supply adapter's label.
Notice Install the device only in environments that meet the specified humidity and temperature limits.
Warning Ensure the equipment is kept away from moisture. Do not pour any liquids on or near the equipment as it could cause electrical shocks or fires.
Warning Never open the equipment housing.
Notice The openings in the equipment housing are for cooling purposes. Do not cover them, as this may lead to overheating.