Before turning on the switch on the main supply, connect the power supply adapter to the designated circuit breaker in the distribution board.
The wiring setup should be as follows:
Red wire (live/phase): Connect this to the L terminal on both the circuit breaker and the power supply.
Black wire (neutral): Connect this to the N terminal on both the circuit breaker and the power supply.
Green/yellow wire (earth/ground): Connect this to the ⏚ (ground) terminal on the power supply and to the appropriate ground terminal on the circuit breaker.
Ensure the correct positioning of each wire to avoid misconnection issues.
After all connections have been securely made:
Double-check that all power cables are securely connected to the power supply adapter.
Make sure the main switch is turned off before powering on the system to avoid electrical hazards.
Once everything is properly connected and verified, you can turn on the main power switch to power up the SAM4 system.
